Categories
World Tech

Root Realme Narzo 20A RMX2050 and Install TWRP Recovery 3.5.2

This post is geared towards those who have purchased Realme Narzo 20A RMX2050 smartphone. Here are a few easy steps to install TWRP Recovery on Realme Narzo 20A via Odin.

If you’ve never been able to install a custom ROM on your own smartphone before, you’re not alone. I wasn’t actually able to do it until a few months ago, but I’m so grateful I finally got to know about the process. I’ve been constantly trying to find the right ROM for my Realme Narzo 20A RMX2050, but nothing ever seemed to work for me. Then, I stumbled upon a Reddit post with a list of ROMs that were made by the XDA Developers community, and it turned out that I already had one installed!

If you have Realme Narzo 20A RMX2050 and want to root your device and flash TWRP Recovery 3.5.1, then you are at the right page. Realme Narzo 20A specifications Qualcomm SDM665 Snapdragon 665 chipset (11nm), Octa-Core CPU/Processor (4×2.0GHz Kryo 260 Gold and 4×1.8GHz Kryo 260 Silver), Adreno 610 GPU, 6.5in display, 102.0 cm2 (~82.3% screen-to-body ratio), IPS LCD, 480 nits (peak), 720 x 1600 pixels, 20:9 ratio (density ~270 ppi), Corning Gorilla Glass 3, Internal storage/ RAM 32GB, 3GB RAM, 64GB, 4GB RAM, Main camera Triple camera / 12MP, f/1.8, 28mm (wide), 1/2.8″, 1.25µm, PDAF / 2MP, f/2.4, (depth) / 2MP, f/2.4, (depth), 8MP selfie camera, f/2.0, 26mm (wide), 1/4″, 1.12µm, Li-Po 5000mAh battery, non-removable, 10W Charging. If you are an Android enthusiast and want to install TWRP root and recovery on your favorite, then you have landed on the right page. In this article, we will walk you through the process of rooting the Realme Narzo 20A RMX2050. TWRP has a tangible design and an attractive user interface (UI). If you follow this guide, you will be able to install the latest version of TWRP for Realme Narzo 20A RMX2050. You can download TWRP Recovery from the links in the Requirements section of this article. Note that this is an unofficial TWRP restore and only applies to the Realme Narzo 20A RMX2050 (confirm the model by going to Settings>General). The following process is only for rooting and installing TWRP on Realme Narzo 20A RMX2050, do not try to use this method on any other device. If you want to unlock the full potential of your Realme Narzo 20A RMX2050 hardware, rooting and flashing a custom recovery, such as. B. TWRP, a major problem. Stock ROMs often have limited and unsupported functionality in terms of customization. If you have both a rooted device and TWRP Recovery flashed, you can install any custom ROM, mods, kernels, Xposed, etc, as well as many applications that require root access to function properly. You can easily root your device with One Click Android Root Tool, either via PC or APK, which is a quick process.

Brief information and benefits of TWRP recovery

TWRP (Team Win Recovery Project) is an open source project developed by a community of developers. With TWRP you can install any custom firmware, root your device, use zip mod files for modifications, Xposed modules for modifications, root and unroot processes with one click. You can also create a full backup of Nandroid and restore it later, flash the image file with a single click, remove unwanted programs, overclock and underclock. With TWRP, you can easily erase data, clear cache and clear after flashing an image file to reflect changes and correct minor cache errors. To install TWRP, your Realme Narzo 20A RMX2050 phone must have an unlocked bootloader. This means that you must first unlock the bootloader to get the root code on the device, and also to perform a configuration. Denial: Although AndroidWeblog.com handles and handles everything very neatly so that our readers get exactly what they want, there is always a small chance that major problems can arise from the steps listed here. Therefore, it is in the user’s best interest to perform all steps very carefully to avoid accidents with your device. Rooting and flashing custom ROMs will permanently void your device’s warranty, and AndroidWeblog.com is in no way responsible for voiding your warranty or picking on your device.

Condition

Check the model number, which should be as follows:

  • Realme Narzo 20A [Models : (RMX2050) (Android 10)

You should ensure that before you start rooting your phone, you have carefully read the disclaimer and agree to act at your own risk. Your phone must be at least 70% charged, otherwise you may experience problems when you try to use it. Don’t take any chances and charge it fully. If you plan to root your phone or install a custom ROM, it’s a good practice to back up your phone. Back up all your media files, like photos, videos and everything else on your computer, as well as your contacts in the cloud. (Applies only to the PC method, skip this step if you want to use the APK method) You must enable the USB debugging option by going to Settings, Apps and Development Options.

Invites you to root Realme Narzo 20A RMX2050

Download Realme/ Oppo USB drivers here. Download the generic ADB drivers here (if your PC already has drivers installed, skip this step). Download the platform tools/ SDK Tools package of the Android SDK from here to your PC. (Android Command Line Tools> Package SDK Tools) Download TWRP recovery for Realme Narzo 20A RMX2050 from here: TWRP repair 3.5.1 (latest version) Download the Chainfire SuperSU from here. Download Magisk Manager from here. Make sure you have downloaded the required files (link in the Requirements section of this article). Then perform the following steps.

Steps to unlock the bootloader of the Realme Narzo 20A RMX2050 under Android 10

Message: If you already have the bootloader unlocked, you can skip these steps. Step one: First you need to connect the Realme Narzo 20A RMX2050 to your computer in Fastboot mode. You can reboot the device with a command in the ADB terminal in fastboot : adb reboot bootloader Step two: Now open the Adb terminal on your computer and simply enter this command: fastboot oem unlock-go Step three: Then run this command: fastboot oem unlock-go At this point, your device will automatically reboot. Now you can root the Realme Narzo 20A RMX2050 because the bootloader of your device is already unlocked.

Steps to flash/install TWRP recovery 3.5.1 on Realme Narzo 20A RMX2050 (Android 10)

Step one: Let’s assume that you have already downloaded the Android SDK (SDK Manager) Platform Tools to your computer. Platform-tools contains the necessary ADB and fastboot binaries. Step two: Make sure the drivers are installed on your computer. Then proceed to the next step. Message: If development settings and USB debugging are already enabled on your device, as described in the Requirements section, skip steps 3 and 4 and go directly to step 5. Step three: Now activate the development settings on the Realme Narzo 20A RMX2050. To do this, go to Settings -> About, then find the build number and click 7 times on the build number, which will activate the developer settings on your device. Step four: If you already have USB debugging, you can skip this step. If you haven’t already, open the development settings and enable the USB debugging option. Step 5: Now open a command prompt on the ADB computer/terminal and just type the command : adb reboot bootloader Step six: Your device should not have gone into fastboot mode. Now copy the TWRP.img file you downloaded in the Requirements section to the same folder where the ADB and fastboot binaries are located. Rename the file to twrp.img and then type this command: fastboot flash recovery twrp.img then run this command, enter : fastboot Step 7 (important): On some devices, custom recovery may not be automatically replaced on first boot. You can find keyboard shortcuts to enter recovery mode on Google. After executing the fastboot reboot command, hold down the appropriate key combination to enter TWRP mode. After booting the device into TWRP mode, TWRP automatically corrects the stock ROM to prevent the possibility of TWRP being replaced by the stock restore. After typing fastboot reboot, hold down the key combination and boot into TWRP. After you download TWRP, TWRP fixes the default ROM to prevent you from replacing the default ROM with TWRP. If you do not perform this step, you will need to restart the installation.

Realme Narzo 20A RMX2050/ Magisk or SuperSU installation

Make sure you have downloaded SuperSU or Magisk Manager (link in the Requirements section of this article). Then perform the following steps. Warning: You can use both Magisk Manager and Super SU, but only one, so choose wisely. If you are not sure, choose Magisk Manager. Step one: Transfer the downloaded SuperSU or Magisk Manager file to the internal memory/SD card of the Realme Narzo 20A RMX2050 smartphone. Step two: Just get started on the recovery. In the TWRP interface, you can make a backup of the stock ROM. However, I recommend you make a backup of the stock ROM. Because if the process fails, you can flash the default ROM. word-image-18403 Step three: Click Install, then navigate to the SuperSU.zip or magisk.zip file and confirm the firmware by dragging it (at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds. Congratulations, you have now rooted the Realme Narzo 20A RMX2050 and flashed the TWRP. Now you can install Xposed Framework and customize your smartphone as you like. If you want to check it, you can download and check the root status through the Root Checker application.

Leave a Reply

Your email address will not be published. Required fields are marked *